Metalworking Machinery

Year of Manufacture 1987,Control Fanuc p system 6M, Largest tool diameter114mm, Sheet thickness 6.5mm, Sheet size 1000mm x 1000mm or 1000mm x 2000mm with 1 reposition, Ram stroke 32mm, Hit rate 350 spm, Input415/3/50 Supplied withQuantity o...

Minimum tool diameter 2mm, Maximum tool diameter 160mm, Wheelhead vertical traverse 200mm, Feed rate (maximum) 600mm / minute, Turntable speed 60 rpm, Turntable size250mm diameter, Wheel size 150mm diameter, Siemens TD200 Control System.

Year of Manufacture 1991, Control Cybelec DNC90 Color 3D, Capacity255 Ton x 4100 mm, Between frames 3750 mm Daylight 375 mm, Throat depth 360 mm, Stroke length 265 mm , Fitted withRear and side guarding Equipment Crowning , X=Back gauge in/...

Control Delem DA-56, Back gauge programmable, Capacity 50 ton x 2500mm, Maximum length of bend 2600 mm, Between frames 2030 mm, Daylight 230 mm, Throat depth 260 mm, Stroke length 100 mm.

Year of Manufacture 1999, Control E300, Guards Infra- red, Capacity,90 ton x 2600mm, Maximum length of bend, 2600 mm, Between frames 2100 mm, Daylight 350 mm, Throat depth 325 mm, Stroke length 150 mm.

Year of Manufacture 1988, Capacity 3050mm x 13mm, Back gauge Power, Rapid blade adjustment,Shadow-line, Work supports 3 @ 880mm, Squaring arms 1 @ 880mm.

Capacity 3m x 6.5mm, Back gauge Power, Rapid blade adjustment, Clamps 12 x Hydraulic, Read-out to back gauge Metric.

Table size 1000mm x 650mm, Angle range 30 - 120 degrees.

Year of Manufacture 2008, Capacitywith Appropriate Formers Angles (Leg-Out)60mm x 60mm x 6mm, Angles (Leg-In)60mm x 60mm x 6mm", T" Section (Leg-Out)60mm x 60mm x 8mm, "T" Section (Leg-In)60mm x 60mm x 8mm, Square 40mm, ...

Diameter of rolls 40mm, Maximum working length 1860mm, Maximum material thickness 0.75mm.

Year of Manufacture 2009, Capacity 3000 kgs, Coil Width 500 mm, Coil Diameter 1800 mm, Coil Bore 470 - 630 mm, Mandrel expansion Range 160 mm.

Capacity0.8mm - 1.6mmNumber of stations7Table size57" x 24" / 1448mm x 610mmInput380/420/3/50 ac 1.5 hp approxMachine set forPittsburg & Double Seam

Punching 34mm diameter x 25mm thick or 55mm diameter x 16mm thick, Throat depth 350 mm, Angle cutting 150 x 150 x 18mm @ 90 degrees or 80 x 80 x10mm @ 45 degrees.Shearing 380 mm x 25 mm or 600 mm x 15 mm, Notching 100 mm x 60 mm x 13mm thic...